Formulated from the same raw materials as our Deep Pour 2 inch single pour epoxy and super gloss Bar and Table Top Epoxy, it matches seamlessly and bonds flawlessly.
Quick Coat Seal can also fill small cracks and voids before flood coat resin application to prevent surface bubbles for a smoother topcoat. Let harden 2-3 hours before sanding cracks and voids. Porous substrates may need additional applications.
This 1:1 ratio kit includes 1 pint of A Resin and 1 pint of B Hardener of our fast setting wood epoxy. It has a 10-12 minute pot life and approximately a 15 minute work time. Don’t dilly-dally!
Surface Prep: All wood surfaces must be clean and free of oil or dust before applying. Remove any grease or oil with acetone. A wire brush may be helpful to clean live-edge crevasses and wood grain.
Directions: Mix for 3 minutes with a mixing stick. Brush on live-edges with a small brush similar to a glue brush. (Do not use a foam brush as it may introduce small air bubbles during application.) Brush on a thin coat and allow to preferably cure hard to the touch (or very tacky) before applying additional seal coats. Let dry for 1 to 1-1/2 hours – hard to the touch - before pouring our WiseBond® Deep Pour epoxy. A fan or a heat gun may be used to speed up the dry time, if necessary.
Do not add any extra solvents or agents to the mixture to try and encourage a quicker cure. Quick Set Seal epoxy is not designed to accept these and you will end up with an epoxy resin that may not cure at all.
Your sealer and big pour epoxy were fantastic and your staff answered what we’re probably silly questions from a first time user. The products worked flawlessly thanks for the help.
So far so good great service and informational instruction Just poured last week table looks great
Easy to work with.great products. Will order again
This epoxy does just what the name says, it sets fast. I used it for the edges of my river table, I only had to wait for an hour and a half for it to be dry so I could use the WiseBond deep pour for the river part
Part A - CALIFORNIA PROPOSITION 65: WARNING: This product can expose you to chemicals including (Bisphenol A CAS 80-05-7, and Epichlorohydrin CAS 106-89-8), which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Part B: - CALIFORNIA PROPOSITION 65: WARNING: This product can expose you to the chemical (Propylene Oxide CAS 75-56-9) which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
© 2020 - WiseBond™, A product of DeckWise®, The Ipe Clip® Fastener Company