"Alameda"Epoxy HYBRID Flake Floor Epoxy Resin Complete Kit - 2:1 Ratio

In Stock, ready to ship

$500 to $1200 depending on sq. ft.

This Water-Based Epoxy Resin Flake Floor Kit is perfect for the DIY homeowner. It comes with a pre-tinted epoxy base coat, flake floor chips, and a urethane top coat - enough for 2 coats. Applications range from concrete garage floors, residential interiors, small warehouses, bars, automotive showrooms, or anywhere that an exceedingly resilient interior concrete flake floor is desired.

This epoxy garage floor color flake kit (also referred to as color chips, or epoxy paint chips) adds little explosions of color creating a beautiful custom floor.

NOTE: Custom HYBRID Flake Floor orders will be handled by our Customer Service Department according to your specific square footage needed. CALL FOR PRICING: 941-896-9851.


Alameda HYBRID (multi-size: 1/4", 1/8", 1/16") Flake Floor Kit Includes:

  • 2-Gallons A-Resin and B-Hardener 2:1 Ratio Epoxy
  • Pre-Tinted ANTIQUE WHITE Base Coat
  • 40 lbs. OLIVE, TAN, COCOA BROWN and WHITE Color Flakes
  • 1-Gallon Water-Based Urethane Gloss or Satin finish

(Based on 160 sq. ft. / Additional product included for higher sq. ft.)

Alameda Flake Color Scheme:

  • 35% White 1/16"
  • 35% Semi-Transparent White 1/16"
  • 13% Wigwam 1/4"
  • 10% Ewa Green 1/4"
  • 5% Olive 1/4"
  • 2% Cocoa Brown 1/4"

Top Coat Options: 1-Gallon Water-Based Urethane Gloss or Satin finish. Top coat coverage per 250 sq. ft. as a 1 coat coverage whereas a second coat is optional depending on desired smoothness of top coat texture.

NOTE: Moisture barrier and Crack Filler sold seperately.

We do not offer samples of our products. Why not?


Read prior to purchasing!


The base coat epoxy component is a 2 component 52% solids, low VOC floor coating. It is a durable-colored base layer for both new and old interior concrete floors; a primer coat; and a binder for epoxy flakes. The high loading of the base coat pigment achieves the preferred substrate tint uniformity.

The base coat floor epoxy creates the highest balance of strength, flexibility, and chemical resistance, all in a low odor, low VOC formulation. Unlike most all 100% solids epoxies, it has remarkable properties related to moisture:

  • Withstands high vapor transmission rate, up to 13 pounds per 1,000 ft² (5.4 kg per 100m²) in 24 hours.
  • Provides a non-permeable vapor barrier, even in basements.
  • Applies on fresh concrete as soon as three days after pouring and placing concrete.

Delivered in this kit, there are more flake product in it than is needed. You’ll have all you need for a 100% broadcast flake coverage. NOTE: Each kit, depending on total sq. ft. coverage, includes enough material for 2 coats of Urethane per 250 sq. ft.

Besides the obvious advantages of colorful custom flake color combinations like this one, color flakes also provide some sound deadening qualities and hide sub-surface imperfections in your concrete. This means concrete patch work and spider cracks are less likely to show through the epoxy coating.

In addition, vinyl color floor flakes such as these are also flexible and strong. When applied to full refusal, they will add a minimum of 5 mils of thickness to your floor, improving both the durability and impact resistance of the surface.

 Lastly, unlike epoxy, the garage floor flakes are U.V. stable. If you apply them to full refusal on an epoxy coating and then clear coat with a U.V. stable Urethane, you will never experience ambering (yellow tint) from exposure to direct or strong indirect sunlight.


Urethane: Clear finish topcoat is available in gloss or satin finishes provides the durability of a solvent base system with the ease and safety of a low VOC (73 g/L) water base system. More user friendly than a polyaspartic and can be used on interior concrete floors. Read More Here.

  • Coverage: Approx. 300-400 square foot per gallon, per coat
  • VOC Rating: Less than 72 g/L
  • Pot Life: Approx. 30 minutes
  • Shelf Life: 1 year in original unopened container
  • Ready for recoat: 6-8 hours (18+ hours at low temperatures)
  • Light Duty Use: 24 hours (Up to 48 hours at low temperatures)
  • Heavy Traffic Ready: 3 days (Up to 5 days at low temperatures)
  • Full Cure: 5-7 days (Up to 14 days at low temperatures)
  • Appearance (cured): Clear Gloss or Satin
  • Appearance (wet): Milky Liquid
  • Odor: Sweet Acrylic
  • Application Temperature: 50 - 90 degrees Fahrenheit


(100-150 SQ FT/GALLON)


  • Available in 1-gallon kits
  • Kit includes: base coat epoxy, pigment, flakes, and top coat.
  • Depending on square footage, larger sq. ft. selections will come with additional material to cover your specific square footage.

*Base Coat pigments, top coats, and flakes also sold separately for custom design floors.


2 years in original, unopened container stored between 40°F-90°F (40°C-32°C), and out of direct sunlight.

NOTE: Do NOT skip prepping your garage floor properly! This is the most important part of the application to ensure a good bond. Mechanically grinding the surface of your garage floor is a must if your garage floor has oil stains, cracks – should be filled, dirt, moisture or an old garage floor coating. All of these will need to be completely removed prior to applying new epoxy flakes.

Once your kit is purchased we will email the step-by-step tutorials on how to install this kit. These tutorials will be on the emailed receipt and sent to the email you use during the checkout process.

Note: If you live in a more humid climate, an area where there’s a lot of rain, or just need protection against moisture, in addition to this floor kit, you may also want to purchase our Vapor Barrier from our Single Items store.

Pour at temperatures between 77°F- 85°F with low humidity in a dust free environment. Allow 24 hours for initial cure. Wait 3 days for a full hard cure.

NOTE: Do NOT skip prepping your garage floor properly!
For instructions and how to prepare your garage floor read GARAGE FLOOR PREPARATION.

How Do You Apply WiseBond® Garage Floor System with Epoxy Floor Flake Chips?

  1. Clean and resurface the floor with a floor grinder or self-leveling concrete; fill all cracks and holes; level crack and hole fills.
  2. For a proper bond, the surface of concrete must be opened up or roughed up to feel like 80 – 180 grit sandpaper. This profile is best accomplished through diamond grinding or shot blasting.
  3. Make sure your concrete floor is not retaining moisture. Test this by taping a 2 ft. x 2 ft. plastic sheet (garbage bag) to the floor, and leave it overnight. If there are water bubbles or spots under the plastic, the concrete is retaining moisture. Apply a water barrier primer and let dry for 24 hours if needed.
  4. Every 2 gallons of epoxy base coat covers 250 sq. ft. of concrete floor. If the area you are working with is any larger than 250 sq. ft., mark 250 ;sq. ft. by starting at the wall, and marking your endpoint with blue painters tape on the wall. This will make sure you don't use too much or too little product for your desired result. Mix epoxy appropriately for your specific coverage.
  5. If the walls have already been painted, use blue painters tape around the edges where your wall and your floor meet while leaving a 2 millimeter gap above the floor. If any foundation block/base board area along the walls require epoxy and flakes, tape that off above as well.
  6. Measure and mix part A & B of floor epoxy at a 1:1 ratio. Add your epoxy base coat colorant pigment and mix thoroughly. This will match the color of your flakes.
  7. Squeegee the base coat epoxy onto your 250 square foot area. Be sure to wear spike shoes!
  8. Spread and backroll the epoxy with a paint roller. (NOTE: Be sure to roll the paint roller on blue painters’ tape beforehand to remove loose fibers).
  9. While the base coat is still wet, throw/flick the flakes into the air and let them fall onto your epoxy (use a chicken feeding motion). Cover the entire floor with flakes evenly.
  10. Once cures, (usually 12-24 hours later) scrape vertical flakes with a trowel or use a stiff brush to knock down flakes. Vacuum the leftover flakes.
  11. Mix, pour and roll the polyaspartic or urethane topcoat to seal your flakes. Let cure 24 hours before walking on and 48 hours before driving on.


The following is a list of tools and supplies that you will need. If you are purchasing a garage floor epoxy kit from an online vendor, some of these tools and supplies may be included with the kit.

We also included optional tools such as 18" rollers. They are not mandatory, but the wider rollers make the application process go much quicker. We highly recommend these if you are covering areas larger than 500 sq. ft.

  • Tarp for mixing station (6x8 works well) -Home Depot, Lowes, etc.
  • Variable speed drill -Home Depot, Lowes, etc.
  • Mixing paddle -WiseBond
  • Paint stir sticks -Home Depot, Lowes, etc.
  • 1qt., 2.5qt., & 5qt. calibrated containers – for mixing quantities for smaller sections -Amazon
  • 3 gallon or 5-gallon buckets for mixing (1 for each coat plus any additional for batch mixing) -Home Depot, Lowes, etc.
  • Latex gloves -Amazon
  • Rags -Amazon
  • 1 gal. MEK or acetone for clean up -Home Depot, Lowes, etc.
  • 9" roller frame -Amazon
  • 3/8" nap premium lint free phenolic core rollers (1 for each coating) -Home Depot, Lowes, etc.
  • Standard paint tray and liners (for water-based epoxy or polyurea and polyurethane coatings) -Home Depot, Lowes, etc.
  • Threaded pole extension for roller frame -Home Depot, Lowes, etc.
  • 3 Chip brushes (1 for each coat) -Amazon
  • Spiked shoes for full color flake floors (1 pair for each installer) -Amazon
  • 10" drywall taping knife (for heavy color flaked floors) -Home Depot, Lowes, etc.
  • Heavy duty painters' tape -Home Depot, Lowes, etc.
  • Cheap plastic drop cloths -Home Depot, Lowes, etc.

    Optional Tools
  • 18" roller frame -Home Depot, Lowes, etc.
  • 18" 3/8" premium lint free phenolic core rollers (1 for each coating) -Home Depot, Lowes, etc.
  • 18" painters' tray -Home Depot, Lowes, etc.

Why Spiked Shoes? Spiked shoes allow you to walk out onto the coating during installation and for tossing the color flakes. We recommend a pair for each installer. Why 18" Items? The 18" roller frames, rollers, and paint tray can easily be purchased online. Some home improvement centers carry them. These products greatly improve the speed and ease of applying a garage floor coating.

Tip: Do not go cheap with the rollers and never try to reuse them for additional coats. Use premium lint free phenolic core rollers to ensure a blemish free coating. Examples are Epoxy Glide, pro/doo-Z, and Purdy. Having 1 or 2 extra is highly recommended.

PART A - CALIFORNIA PROPOSITION 65: This product contains a chemical(s) known to the state of California to cause cancer, birth defects or reproductive harm, which are subject to the requirements of California Proposition 65. FOR MORE INFORMATION GO TO: WWW.P65WARNINGS.CA.GOV.

PART B - CALIFORNIA PROPOSITION 65: This product contains a chemical(s) known to the state of California to cause cancer, birth defects or reproductive harm, which are subject to the requirements of California Proposition 65. FOR MORE INFORMATION GO TO: WWW.P65WARNINGS.CA.GOV.



Added to cart successfully!