Bar & Table Top Epoxy 1:1 Ratio
3 Gallon (3 - 1 Gal Kits) Bundle

In Stock, ready to ship
*** Some discount codes may not be eligible on this multi-kit epoxy bundle because it is already discounted.

3-Gallon Kit Bundle: Three 1/2-Gal A & Three 1/2-Gal B

WiseBond® Bar & Table Top Epoxy is a super wet gloss epoxy for bar and table top epoxy coating. This wood and concrete counter top epoxy is a self-leveling high gloss finish epoxy that is UV stable for surface flood coatings.

We do not offer samples of our products. Why not?

Due to DOT regulations, epoxy MUST ship ground. Expedited shipping is not possible.

This thin pour epoxy produces a rich super gloss look and is typically used for a 1/8 in. thick finish coat for bar tops, tables, river tables and most any table or counter top surface. It delivers a flood coat ideal for applications requiring a high level of see through transparency and high gloss. It can also be tinted with mica powders, dyes and alcohol pigments for stunning faux table top finishes.

WiseBond® Bar & Table Top Epoxy features a 1:1 mix ratio and a low exothermic reaction cure, giving plenty of time to perfect your wood table project. It has virtually no odor and can be used indoors without ventilation or bulky respiration equipment.

FDA Food Safe Compliant(CFR 175.300 - Code of Federal Regulations Title 21)
  • Super wet gloss
  • Self-leveling flood coat
  • Low heat & low odor
  • Zero VOC & food safe
  • Bar tops & counter tops
  • River & Live edge table coating
  • High UV Resistance
  • Crystal clear, high gloss
  • Easy to use
  • 100% solids

NOTE: WiseBond® Epoxies are VOC-Free. We do not have FDA approval certifying direct, long-term contact with food. However once epoxy is fully cured for 30 days, it is an inert plastic and should be fine for incidental exposure to food. It is not antimicrobial. Epoxy is not safe to ingest (liquid or cured). Do not cut on or prepare raw food on epoxy surfaces.


Each epoxy kit includes a resin (Part A) and a hardener (Part B). The 1 Gallon Kit includes 1/2 gallon of resin and 1/2 gallon of hardener. Mix equal parts of A and B together. Mix thoroughly for three (3) minutes and apply to the surface between 77°F- 85°F. Allow 24 hours between pouring additional layers. Wait 3 days for a full cure and 30 days for a full hard cure.


Never pour A & B into a container without measuring proper ratios.
Mix for the time indicated on the bottle, making sure to scrape the sides occasionally. Mix in any colorants until you acheive desired saturation.
Continue until the epoxy has a single consistency (no streaks or swirls) and use immediately.

Part A - CALIFORNIA PROPOSITION 65: WARNING: This product can expose you to chemicals including (Bisphenol A CAS 80-05-7, and Epichlorohydrin CAS 106-89-8), which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information, go to

Part B - CALIFORNIA PROPOSITION 65: WARNING: This product can expose you to the chemical (Propylene Oxide CAS 75-56-9) which is known to the State of California to cause cancer. For more information, go to



Added to cart successfully!