Due to DOT regulations, epoxy MUST ship ground. Expedited shipping is not possible.
Perfect for live-edge river tables, creative table making, wood slabs, wood working, and object art casting projects. This epoxy is cures to a crystal clear water-like appearance and designed for a long cure to make it easy to work with.
WiseBond® Deep Pour™ Epoxy has been engineered to be low-odor, and zero VOC with a slow exothermic reaction to prevent cracking and shrinkage. Powdered colorants, dyes, and alcohol inks can be mixed into the epoxy for amazing special effects adding vibrancy to any river table, encapsulated object, voids, turning projects, custom wood tables or art projects.
WiseBond® Deep Pour™ epoxy features a 2:1 mixing ratio and can be used indoors without ventilation or bulky respiration equipment. Each epoxy kit includes a resin (part A) and a hardener (part B).
Mix thoroughly for three (3) minutes and transfer to a clean secondary mixing container and mix again for proper results.
Pour at temperatures between 77°F- 85°F with low humidity in a dust free environment. Allow 12-24 hours between pouring additional layers. Wait 3 days for a full cure and 30 days for a full hard cure.
WiseBond® Deep Pour™ Epoxy is a Low heat, Low VOC, and Low odor making this product perfect for both the professional artist and the everyday woodworking hobbyist.
This product is NOT to be used for a 1/8" flood coat pour!
For a 1/8" glossy, self-leveling finish coat use WiseBond® Bar & Table Top Epoxy.
Do not ingest. Wear proper PPE and read appropriate Data Sheets.
WiseBond® Deep Pour Epoxy is not recommended in small amounts, the drying time will slow but it will still cure. WiseBond® Deep Pour casting resin is not designed as the final coat. This product is NOT to be used for normal 1/8" flood coat pour.
Only mix WiseBond® Quick Set Seal as much as needed in small batches. This quick setting epoxy has a very short pot life and unused epoxy will begin to overheat within 10-12 minutes when left in mixing containers. Do not allow extra unused epoxy to sit! Pour all unused epoxy onto a scrap piece of wood or piece of cardboard in a thin layer to prevent overheating.
PRECAUTIONS - ALWAYS READ ALL SDS SHEETS LOCATED IN THE ABOVE DROP DOWN MENU. CALIFORNIA PROPOSITION 65 STATEMENT IS INCLUDED IN EACH PRODUCT SDS.
Part A - CALIFORNIA PROPOSITION 65: WARNING: This product can expose you to chemicals including (Bisphenol A CAS 80-05-7, and Epichlorohydrin CAS 106-89-8), which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Part B - CALIFORNIA PROPOSITION 65: This product contains no listed substances known to the State of California to cause cancer, birth defects or other reproductive harm, at levels which would require a warning under the statute.
© 2023 - WiseBond®, A product of DeckWise®, The Ipe Clip® Fastener Company