Weekend DIY System
Weekend Garage DIY Epoxy Flake Floor Installation
The Easiest No-Grind Epoxy Flake Garage Floor Built for DIY Savings!
Real Garage Transformations
× ❮ ![]()
❯
It’s Never Been Easier to Install an Epoxy Flake Garage Floor. Save Thousands Doing It Yourself!
WiseBond DIY No-Grind Epoxy Flake Floor Kits, also known as epoxy chip or broadcast floors, creates a seamless, high-performance garage floor surface with outstanding durability and chemical resistance. This system transforms dull, worn concrete into a bold, multi-dimensional finish built to handle real-world use.
Designed for DIY homeowners, this Weekend Epoxy Flake Floor System delivers professional results with speed and simplicity, without hiring an expensive contractor. No special skills required, just follow the process and achieve a floor that looks like it was installed by a pro.
Skip the surface grinding and get straight to results. Our revolutionary SkipGrind Primer eliminates grinding, dust, and days of prep. Just clean, apply, and go. It’s the fastest, easiest way to achieve a professional epoxy flake floor without the mess or hassle.
Best of all, you can save thousands of dollars by installing it yourself. Our DIY kits are typically 3–4x less expensive than hiring a contractor, giving you full control over both quality and cost.
6 Steps to Your New Showroom Garage Floor!
Step 1
Clean, Degrease & Etch Floor
Step 2
Apply SkipGrind Primer
Step 3
Apply WiseFlake Epoxy
Step 4
Apply Multicolor Flake Chips
Step 5
Clean and scrape dried flake chips
Step 6
Apply SparticPro Polyaspartic Clear Coat
Weekend Epoxy Flake Installation Timeline
| Phase | Working Time | Task / Description | Cure/Wait |
|---|---|---|---|
| Preparation | Before Application | Empty garage; Grind & Fix Cracks; Sweep, vacuum, clean & etch; Mask/tape walls & objects. | |
| Stage 1 | 1 Hour | Mix & Apply SkipGrind Concrete Primer. Do not fully close garage door. | 18 Hours |
| Stage 1 | 1 Hour | Apply Flake Floor Epoxy Base. Do not fully close garage door. | 6 Hours |
| Stage 2 | 1 Hour | Scrape and vacuum excess epoxy flakes from floor | N/A |
| Stage 2 | 1 Hour | Apply Polyaspartic Clear Top Coat. Do not fully close garage door. | 6 Hours (Light Walking) |
| Recovery | N/A | Return of contents / No vehicle traffic. (After full 24 hour cure) | 18 Hours (Do not slide objects) |
| Return to Service | N/A | Safe for driving / Vehicle traffic (After full 24 hour cure) | 48 Hours |
A Smarter, More Affordable Garage Floor System Without The Markup.
Our Epoxy Flake Floor Kits are designed to fit floors ranging from small one-car garages (150–250 sq. ft.) to larger spaces up to 600 sq. ft. Each kit is carefully measured to provide the right amount of materials for your specific floor size, so you get professional results without paying professional labor costs.
Skip the Grinder and Get Straight to Results
What sets this system apart is our revolutionary SkipGrind Primer.
This all-in-one floor prep system eliminates the need for mechanical concrete surface grinding, saving time, money, and hassle, and eliminating one of the biggest costs contractors charge for. It bonds to virtually any properly cleaned surface, creating a strong adhesion layer without the dust, noise, and labor of traditional prep methods.
Concrete garage floor surface prep that once took days can now be completed in hours, making this system faster, cleaner, and far more DIY-friendly.
Complete Kits Make Installation Fast and Easy.
Each WiseBond® Flake Floor Kit includes everything you need to achieve a full broadcast floor, without unnecessary extras that drive up cost. Every kit is shipped with more product than competing systems, ensuring you can achieve a true 100% flake coverage, the same result contractors charge thousands for:
- Pre-tinted 3-part no-grind primer
- Pre-tinted 2:1 epoxy base coat
- Multicolored decorative flake chips
- Durable polyaspartic topcoat
- Tools and accessories additions
Simply select your square footage, and your kit will be assembled with the correct amount of materials. Add any epoxy tools or accessories you may need, and you’re ready to go.
Engineered for 100% Coverage. Professional Results at DIY Cost.
Engineered for 100% coverage, each Epoxy Flake Flooring System includes enough flake chips to broadcast into the wet epoxy to the point of rejection, ensuring a complete, uniform finish. This process allows you to achieve a true full broadcast that fully covers the epoxy base coat for a consistent, professional appearance. Flake quantities are precisely scaled to your kit size, so every project looks exceptional, regardless of square footage.
1. CHOOSE YOUR FLAKE COLOR
Review our multicolor flake floor chips.
2. SELECT YOUR SQUARE FOOTAGE
Choose your coverage and receive everything needed.
3. PICK YOUR TOOLS AND ACCESSORIES
Make sure to add the proper tools for easy application.
4. ADD TO YOUR CART
Add your products to your cart and get going!
A Clean, Cost Affective, High-End Floor That Lasts.
Epoxy flake floors deliver a clean, terrazzo-like appearance that instantly upgrades any garage or workshop. These coatings are not only visually striking, but also durable, slip-resistant, and easy to maintain.
Our 1/4" flake floor epoxy kits are specially measured by square footage for car garages. Simply choose a pre-assembled epoxy kit to your liking and get the right amount of product for the size of your garage floor, while keeping thousands in your pocket.
You Can Do This! Why Hire a Contractor?
Turn any new or worn garage or workshop into a showroom in just one weekend. Upgrade a tired shop floor into a functional, high-performance workspace.
Epoxy flake flooring adds visual impact, durability, and personality to any space. With a wide range of flake chip color blends available, your floor can be as bold, or as subtle, as you want.
Why hire an expensive contractor when you can get the same results yourself?
Built For Affordability, Performance, and Longevity.
The ease of installation with WiseBond® Epoxy Floor Flake Coating Kits delivers a durable, slip-resistant concrete coating, engineered for real DIY savings and pro-quality results.
Decorative epoxy flakes, also known as vinyl color chips, are engineered to enhance both the appearance and durability of your floor. These 1/4" epoxy flakes are pre-blended into rich color combinations and designed to create a seamless, resilient surface.
Once applied, scraped, and sealed, the result is a long-lasting, professional-grade concrete floor coating that performs as good as it looks.
Every epoxy flooring installation looks like a professional high-end floor coating!
Faster Prep. Better Results. More Savings.
Skip the grinding and get straight to professional results.
Our SkipGrind Primer simplifies concrete prep like never before. By bonding directly to properly cleaned surfaces, it eliminates the need for mechanical profiling while still delivering exceptional adhesion and performance, saving you time, labor, and money.
What used to take days can now be completed in hours, without sacrificing quality.
Weekend Project. Professional Results.
Every WiseBond® kit is designed for easy, roll-on application over existing concrete floors. With proper prep using SkipGrind Primer, you can transform your garage or shop floor in just two days! Each system includes step-by-step guidance to walk you through the entire process, making it achievable for any DIYer.
Complete Coverage Every Time
Each kit includes more than enough material to achieve full broadcast coverage for your specific square footage. Apply flakes into the wet epoxy until rejection, allow to cure, then scrape away excess to create a uniform epoxy flake surface.
Finish with our polyaspartic clear topcoat to lock in a durable, seamless, and visually striking epoxy flake floor, delivering long-term performance without long-term costs.
Note: Proper prep is critical for long-term performance. Surfaces with stains, cracks, oil, moisture, or previous coatings must be properly addressed and sealed with garage floor no grinding SkipGrind Primer before applying the epoxy system.
© 2026 - WiseBond®, A product of DeckWise®, The Ipe Clip® Fastener Company