WiseBond’s clear satin water-based floor polyurethane is a 2 component 57% solids, acrylic polyurethane designed as a non-yellowing clear coating for concrete flake floors as a top coat on epoxy systems. The commercial grade clear finish topcoat provides the durability of a solvent base system with the ease and safety of a low VOC (73 g/L) water base system. Unlike nearly all polyurethanes, WiseBond’s clear water-based polyurethane has remarkable properties related to vapor permeability, which permits its use in specific exterior settings.
Generating the premier balance of strength, added UV stability, flexibility, chemical and scratch resistance, it is both user-friendly and extremely durable.
WiseBond’s water-based polyurethane is ideally suited for concrete floor flake overlays, or any high traffic area where an exceedingly resilient floor is desired.
For interior epoxy flake floor coatings, especially in areas or environments in which you are looking for an eco-friendly coating, WiseBond’s WB Clear Satin Polyurethane can be an extremely effective sealer for your concrete overlay projects. With a VOC rating that will allow it to be placed in 99 percent of all states and municipalities, If you're a homeowner or DIY weekend warrior looking to eliminate odor and lower the chemical vapor residue released, this is the product for you!
Coverage: Approx 300-400 square foot per gallon, per coat (varies widely based on substrate porosity and application methods)
VOC Rating: less than 72 g/L
Solids Content: 57%
Pot Life: approx 30 minutes
Shelf Life: 1 year in original unopened container
Ready for recoat: 6 - 8 hours (18+ hours at low temperatures)
Light Duty Use: 24 hours ( Up to 48 hours at low temperatures)
Heavy Traffic Ready: 3 days (Up to 5 days at low temperatues)
Full Cure: 5 - 7 days (Up to 14 days at low temperatures)
Appearance (cured): Clear Satin or Satin
Appearance (wet): Milky Liquid
Water Resistance: Excellent, beads water
Mechanical Stability: Excellent
Light Stability: Excellent
Odor: Sweet Acrylic
Application Temperature: 50 - 90 degrees Fahrenheit
Gasoline: no effect at 24 hrs
Diesel Fuel: no effect at 24 hrs
Kerosene: no effect at 24 hrs
Brake Fluid: softens/discolors at 24 hrs
Skydrol: dulls at 24 hrs
Our WiseBond Polyurethane Floor Top-Coat product is one of the easiest to apply and use:
Step 1: Any concrete surface that is about to be overlayed with epoxy flakes needs to be completely cured, clean and free of all contaminants.
Step 2: Make sure that temperatures will remain between 50 and 90 degrees Fahrenheit and relative humidity to stay below 75%.
Step 3: Pour 1 part "B" into three parts "A". Part A container is short-filled to accept all of Part B. Mix A and B mechanically for a minimum of 3 minutes scraping the sides frequently.
Step 4: Use a premium, de-fuzzed, phenolic core roller to roll out thin coats over workable area, making sure to maintain wet edges and backroll the entire surface.
Step 5: Two layers are typically suggested with any interior project receiving a polyurethane coating, with the second layer applied as soon as first coat can be walked on, and is used in the same manner as the first coat.
PART A - CALIFORNIA PROPOSITION 65: This product contains a chemical(s) known to the state of California to cause cancer, birth defects or reproductive harm, which are subject to the requirements of California Proposition 65. FOR MORE INFORMATION GO TO: WWW.P65WARNINGS.CA.GOV.
PART B - CALIFORNIA PROPOSITION 65: This product contains a chemical(s) known to the state of California to cause cancer, birth defects or reproductive harm, which are subject to the requirements of California Proposition 65. FOR MORE INFORMATION GO TO: WWW.P65WARNINGS.CA.GOV.
© 2023 - WiseBond®, A product of DeckWise®, The Ipe Clip® Fastener Company