Clear Gloss Polyurethane Epoxy Top CoatWater-Based

Out Of Stock
$0.00

NOT FOR SALE YET!

WiseBond’s water-based clear floor polyurethane top coat is available in either a gloss or satin finish. Formulated as a highly durable transparent flooring protective coating for interior commercial or residential applications with low VOC properties.

Size:



We do not offer samples of our products. Why not?

WiseBond’s clear water-based floor polyurethane is a 2 component 57% solids, acrylic polyurethane designed as a non-yellowing clear coating for concrete, cement-based overlays, or as a top coat on epoxy systems. The commercial grade clear finish topcoat is available in gloss or satin finishes provides the durability of a solvent base system with the ease and safety of a low VOC (73 g/L) water base system. Unlike nearly all polyurethanes, WiseBond’s clear water-based polyurethane has remarkable properties related to vapor permeability, which permits its use in specific exterior settings.

Note: See paragraph 5 under surface prep. Generating the premier balance of strength, added UV stability, flexibility, chemical and scratch resistance, it is both user-friendly and extremely durable.

As a vertical wall coating, it enhances anti-graffiti properties. WiseBond’s water-based polyurethane is ideally suited for both commercial and residential flooring: aircraft hangars, clean room floors, manufacturing facilities, warehouses, bars, clubs, retail stores, automotive showrooms, residential interiors, garage floors, stadiums, or any high traffic area where an exceedingly resilient floor is desired.

For interior coatings, especially in areas or environments in which you are looking for an eco-friendly coating, WiseBond’s WB Clear Gloss can be an extremely effective sealer for your concrete projects. With a VOC rating that will allow it to be placed in 99 percent of all states and municipalities, WiseBond’s polyurethane is an ideal coating for generating LEED points and earning green projects as a professional applicator. If you're a homeowner or DIY weekend warrior looking to do some work on your home but need to eliminate odor and lower the chemical vapor residue released by your particular project.

TYPICAL APPLICATIONS

  • Eco-Friendly Commercial Kitchen Floors
  • Retail Floor Protection Green Projects
  • Low Odor Restaurant and Bar Floors
  • No-Caustic Residential Living Areas
  • Eco-Friendly Interior Hotel and Resort Flooring
  • High-Traffic Interior Walkways Green Projects
  • Low Odor Auditorium and Stage Floors
  • Non-Caustic Residential and Hotel Bedroom Floors

HOW TO APPLY? WISEBONDS WATER-BASED CLEAR FLOOR POLYURETHANE

Our WiseBond Polyurethane products are some of the easiest to apply and use:

Step 1: Any surface that is about to be sealed needs to be completely cured, clean and free of all contaminants and fully profiled and etched.
Step 2: Make sure that temperatures will remain between 50 and 90 degrees Fahrenheit and relative humidity to stay below 75%.
Step 3: Pour 1 part "B" into three parts "A" into large mixing container (we pre-measured the kits to make it easy on you!) and mix mechanically for a minimum of 3 minutes.
Step 4: Use a premium, de-fuzzed, phenolic core roller to roll out thin coats over workable area, making sure to maintain wet edges and backroll the entire surface.
Step 5: Two layers are typically suggested with any interior project receiving a polyurethane coating, with the second layer applied as soon as first coat can be walked on, and is used in the same manner as the first coat.
Step 6: While not necessarily required, we suggest the use of a sacrificial wax coating extend the life of the floor and add a measure of slip resistance.


SPECIFICATIONS & PROPERTIES

Coverage: Approx 300-400 square foot per gallon, per coat (varies widely based on substrate porosity and application methods)

VOC Rating: less than 72 g/L

Solids Content: 57%

Pot Life: approx 30 minutes

Shelf Life: 1 year in original unopened container

Ready for recoat: 6 - 8 hours (18+ hours at low temperatures)

Light Duty Use: 24 hours ( Up to 48 hours at low temperatures)

Heavy Traffic Ready: 3 days (Up to 5 days at low temperatues)

Full Cure: 5 - 7 days (Up to 14 days at low temperatures)

Appearance (cured): Clear Gloss or Satin

Appearance (wet): Milky Liquid

Water Resistance: Excellent, beads water

Mechanical Stability: Excellent

Light Stability: Excellent

Diluent: Water

Odor: Sweet Acrylic

Application Temperature: 50 - 90 degrees Fahrenheit


CHEMICAL RESISTANCE

Gasoline: no effect at 24 hrs

Diesel Fuel: no effect at 24 hrs

Kerosene: no effect at 24 hrs

Brake Fluid: softens/discolors at 24 hrs

Skydrol: dulls at 24 hrs


MIXING TIPS

Never pour A & B into a container without measuring proper ratios.
Mix for the time indicated on the bottle, making sure to scrape the sides occasionally. Mix in any colorants until you acheive desired saturation.
Continue until the epoxy has a single consistency (no streaks or swirls) and use immediately.

PART A - CALIFORNIA PROPOSITION 65: This product contains a chemical(s) known to the state of California to cause cancer, birth defects or reproductive harm, which are subject to the requirements of California Proposition 65. FOR MORE INFORMATION GO TO: WWW.P65WARNINGS.CA.GOV.

PART B - CALIFORNIA PROPOSITION 65: This product contains a chemical(s) known to the state of California to cause cancer, birth defects or reproductive harm, which are subject to the requirements of California Proposition 65. FOR MORE INFORMATION GO TO: WWW.P65WARNINGS.CA.GOV.

 

img

Added to cart successfully!