"Blue Granite" HYBRID Epoxy Floor Flakes

Out Of Stock

$500 to $1200 depending on sq. ft.


Blue Granite HYBRID (multi-size: 1/4", 1/8", 1/16") Flake Floor Kit Includes:
• 40 lbs. BLUE, CHARCOAL, MARBLE and WHITE Color Flakes

(Based on 160 sq. ft. / Additional product included for higher sq. ft.)

Blue Granite Flake Color Scheme:

  • 2% White 1/4"
  • 3% Maui Blue 1/4"
  • 3% Dolerite (Marble) 1/4"
  • 3% White 1/8"
  • 3% Metapelite (Stone) 1/8"
  • 3% V.C. Maui Blue 1/8"
  • 3% Basalt (Marble) 1/8"
  • 3% Black 1/16"
  • 8% Schist (Marble) 1/16"
  • 8% White 1/16"
  • 9% Charcoal 1/16"
  • 9% Tabu 1/16"
  • 9% Stone 1/16"
  • 17% Sommelier 1/16"
  • 17% Antique White 1/16"

WiseBond epoxy floor flake chips create a vibrant, seamless, resilient surface from plain painted concrete. Although the system is simple both in composition and installation, it yields an exceptionally durable and long lasting garage floor.

We do not offer samples of our products. Why not?


These polymer garage floor flake chips provide not only a pleasing palette of color but also add a measure of slip resistance to the surface.

Epoxy flake floor chips, also known as decorative vinyl color chips, flakes or flick are formulated paint aggregates for use in right combination with our garage floor epoxy with flake chip shaving systems are used to enhance the aesthetic qualities of seamless, resin-based flake chip floor coatings. This incredibly unique product is random in shape, but sized within a standardized range and pre-blended into a broad and rich variety of colors and palettes.

The relative ease with which Epoxy Flake coatings are applied allows for this system to be implemented, not just by seasoned professional decorative contractors, but also homeowners and DIY weekend warriors.

Epoxy Flake systems continue to gain immense popularity among architects, designers, contractors and consumers, due to their unique properties that deliver complete customization to commercial, residential garage coating, retail and industrial floors with an endless array of color styles, textures, sizes and blending options.



Available in 40 lb. boxes


Read prior to purchasing!

How To Apply WiseBond® Garage Floor Flake Chips.

  1. While the epoxy base coat is still wet, broadcast the flakes onto the epoxy. Wearing spiked shoes, broadcast the flakes evenly by tossing/flicking them in the air and letting them shower down on the wet epoxy floor. Toss the flakes by hand upward in the air so that they float down to the wet base coat. (Think of a throw/flick motion like tossing chicken feed.)
  2. Broadcast sufficient flakes for 100% coverage; completely cover the epoxy surface. If the floor has low spots where the base coat is deeper, flakes may “sink.” Broadcast sufficient flakes to completely saturate the low spot.
  3. Remove Excess Flakes: Once cured, (usually 8-10 hours later) use a trowel or wide floor scraper to knock down sharp flake edges or vertical flake chips. Sweep with a stiff broom and vacuum all excess flakes off the floor - only after it is cured dry.



The following is a list of tools and supplies that you will need. If you are purchasing a garage floor epoxy kit from an online vendor, some of these tools and supplies may be included with the kit.

We also included optional tools such as 18" rollers. They are not mandatory, but the wider rollers make the application process go much quicker. We highly recommend these if you are covering areas larger than 500 sq. ft.

  • 10" drywall taping knife (for heavy color flaked floors) -Home Depot, Lowes, etc.
  • Heavy duty painters' tape -Home Depot, Lowes, etc.
  • Cheap plastic drop cloths -Home Depot, Lowes, etc.
  • Spiked shoes for full color flake floors (1 pair for each installer) -Amazon

Why Spiked Shoes? Spiked shoes allow you to walk out onto the coating during installation and for tossing the color flakes. We recommend a pair for each installer.



Added to cart successfully!